Orbital Shakers
Bellco Glass, Inc. Low Profile Single Pan Hot Shaker,115V
Bellco’s new Low Profile Hot Shaker provides gentle, large orbit shaking motion combined with precise temperature control. Designed to be the perfect solution for incubation of electrophoretic gels and filter hybridization media, the Low Profile layout promotes easy access to the independent microprocessor driven temperature controller and reliable control of shaking speeds up to 75 oscillations per minute. The quiet brushless drive motor and repeatable, stable temperature settings from 5°C above ambient up to 99.9°C may be effectively used in most biochemical, chemical and microbiological applications.. MADE IN THE USA
Bellco Glass, Inc. Mini Orbital Shaker Complete, 100V W/8 Pos Tray
The Bellco Benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between thespeed range of 50 to 1550 rpm and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory.. MADE IN THE USA
Waters Corp Microplate Shaker, Orbital, Connected Device, Vibration-Free Mixing
The Microplate Shaker+ utilizes market-leading orbital shaker technology that integrates seamlessly with OneLab. This connectivity allows for remote setup and monitoring, offering a broad spectrum of vibration-free mixing speeds. Its design aims to reduce errors and guarantee high repeatability in operations.
- Market leading orbital shaker technology.
- Seamlessly connected with OneLab.
- Enables remote set-up and monitoring.
- Wide range of vibration-free mixing speeds.
- Minimizes error.
- Ensures maximum repeatability.
Bellco Glass, Inc. Orbital Shaker,12V/115V With 25x25cm Tray
The Bellco btbTM12 Volt Orbital Shaker is a compact unit designed for continuous duty shaking using intrinsically safe low voltage electronics. The one-inch orbital motion provides even mixing. The rubber suction cup feet keep the unit firmly attached to surface. Counterbalanced drive shafts for precise orbital motion. Includes 25x25cm (10x10" ) tray. Dims: 11x11x5" (28x28x14cm). NOTE: CAN USE THE UNIVERSAL TRAYS WITH CLAMPS BUT ONLY THE SMALL TRAYS - 25X25. MADE IN THE USA
Chemglass Life Sciences Chemglass Incubator, Orbital Shaking, 23 Cu Ft, CO2 Humidified
The Chemglass 23 cu ft CO2 humidified orbital shaking incubator is designed for culturing suspension cells and other temperature-sensitive biological samples. It provides precise temperature and CO2 control, orbital shaking across three adjustable shelves, and humidification to minimize medium evaporation.
- Large 650 L (23 cu ft) chamber capacity.
- 25 mm orbital stroke for consistent mixing.
- Temperature range ambient +5 to 60 °C.
- Temperature uniformity ±0.1 °C at 37 °C.
- Infrared CO2 sensor with 0-20% control range.
- Humidified chamber to reduce medium evaporation.
- Speed range 30-150 rpm.
- Three removable shelves for high-capacity loading.
- Exterior dimensions 33.5 x 30.7 x 59 in; interior 27.6 x 25.6 x 59 in.
- Two-year warranty.
Cole-Parmer Ibi Scientific BDRAA115S Belly Dancer Shaker, 110/115VAC
Combination of vertical and horizontal orbital motion allows rapid exchange of solvents when staining and destaining gels and ensures lower background blotting. The lightweight and extremely quiet shaker has strong suction feet for load stability. Trouble free construction contains no belts or pulleys, keeping it simple and durable. High quality shunt wound DC motor and control allow for a long life and dependable performance. Variable speed control, from 0 to 125 rpm, with no cogging at slow speeds. Collar adjustment varies platform angle from flat to 12 °pitch. Orbital throw is 1 inch. The open-sided platform accommodates oversize containers. What's included: a platform, removable nonskid mat, 6-ft 110/115VAC power cord (no cord included for 220/240VAC model).
Bellco Glass, Inc. Orbital Shaker Complete, 100V-51x51
The Bellco Benchtop Orbital Shakers are ideal for staining and washingelectrophoresis gels or for any applications requiring mixing or agitationof solutions. They are engineered to operate between the limits of 30 andapproximately 350 revolutions per minute, and to hold their speed at anyselected setting to approximately plus or minus five percent.. MADE IN THE USA--Speed range: 30 - 350 rpm +/- 5%--Circular orbit: 2.5 cm (1" ) orbit--Load: 11 kg (25 lbs) maximum--Weight: 7.6 kg (17 lbs)--7744-01010, 7744-10220 & 7744-01100 units have a platform deck of 25 x 25 cm--7744-02020, 7744-20220 & 7744-02200 units have a platform deck 50 x 50 cm
Bellco Glass, Inc. Mini Shaker Base Only,100V
The Bellco Benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between thespeed range of 50 to 1550 rpm and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory.. MADE IN THE USA
Bellco Glass, Inc. Orbital Shaker Complete, 100V-25x25
The Bellco Benchtop Orbital Shakers are ideal for staining and washingelectrophoresis gels or for any applications requiring mixing or agitationof solutions. They are engineered to operate between the limits of 30 andapproximately 350 revolutions per minute, and to hold their speed at anyselected setting to approximately plus or minus five percent.. MADE IN THE USA--Speed range: 30 - 350 rpm +/- 5%--Circular orbit: 2.5 cm (1" ) orbit--Load: 11 kg (25 lbs) maximum--Weight: 7.6 kg (17 lbs)--7744-01010, 7744-10220 & 7744-01100 units have a platform deck of 25 x 25 cm--7744-02020, 7744-20220 & 7744-02200 units have a platform deck 50 x 50 cm
Bellco Glass, Inc. Digital Rocker Com,115V
The Bellco Digital Rocker is a slow speed rocker for general laboratorycell culture experimentation. This Bellco design incorporates a rockingplatform that accepts a variety of optional trays. Eight tray models areavailable, including three equipped with flask clamps for common sizesof flasks. Peg and Grommet style trays make changing convenient. Thetimer circuit permits automatic shutoff after 3-120 minutes.. MADE IN THE USA
Bellco Glass, Inc. Shaker Base Only, 230V
The Bellco Benchtop Orbital Shakers are ideal for staining and washingelectrophoresis gels or for any applications requiring mixing or agitationof solutions. They are engineered to operate between the limits of 30 andapproximately 350 revolutions per minute, and to hold their speed at anyselected setting to approximately plus or minus five percent.. MADE IN THE USA--Speed range: 30 - 350 rpm +/- 5%--Circular orbit: 2.5 cm (1" ) orbit--Load: 11 kg (25 lbs) maximum--Weight: 7.6 kg (17 lbs)
Bellco Glass, Inc. Shaker Base Only, 115V
The Bellco Benchtop Orbital Shakers are ideal for staining and washingelectrophoresis gels or for any applications requiring mixing or agitationof solutions. They are engineered to operate between the limits of 30 andapproximately 350 revolutions per minute, and to hold their speed at anyselected setting to approximately plus or minus five percent.. MADE IN THE USA--Speed range: 30 - 350 rpm +/- 5%--Circular orbit: 2.5 cm (1" ) orbit--Load: 11 kg (25 lbs) maximum--Weight: 7.6 kg (17 lbs)
Bellco Glass, Inc. Brushless Orbital Shaker, 115V
The Bellco Orbital Shaker is a compact, heavy-duty variable speed shaker. It is used for the agitation of electrophoretic gels and filter assay media for staining, destaining and assay development. The Shaker accommodates a variety of vessels. It is continuously adjustable from 30 to 350 RPM. This Bellco design incorporates an orbital platform that accepts a variety of optional trays. A variety of tray models are available, including three equipped with flask clamps for common sizes of flasks. Peg and Grommet style trays make changing convenient. MADE IN THE USA
Bellco Glass, Inc. Low Profile Hot Shaker,230V
Bellco’s new Low Profile Hot Shaker provides gentle, large orbit shaking motion combined with precise temperature control. Designed to be the perfect solution for incubation of electrophoretic gels and filter hybridization media, the Low Profile layout promotes easy access to the independent microprocessor driven temperature controller and reliable control of shaking speeds up to 75 oscillations per minute. The quiet brushless drive motor and repeatable, stable temperature settings from 5°C above ambient up to 99.9°C may be effectively used in most biochemical, chemical and microbiological applications.. MADE IN THE USA